Mostly editorial review.

CHANGELOG.md

@@ -15,6 +15,7 @@ For each category, *Added*, *Changed*, *Fixed* add new entries at the top!
 ### Fixed
 
 - Attempt to handle docs generation enabling `deny(missing_docs)`
+- Book: Editorial review
 - Use native GHA rustup and cargo
 - Distinguish between thumbv8m.base and thumbv8m.main for basepri usage.
 

book/en/src/by-example/app_init.md

@@ -1,13 +1,18 @@
 # App initialization and the `#[init]` task
 
 An RTIC application requires an `init` task setting up the system. The corresponding `init` function must have the
-signature `fn(init::Context) -> (Shared, Local, init::Monotonics)`, where `Shared` and `Local` are the resource
+signature `fn(init::Context) -> (Shared, Local, init::Monotonics)`, where `Shared` and `Local` are resource
 structures defined by the user.
 
-The `init` task executes after system reset (after the optionally defined `pre-init` and internal RTIC
+The `init` task executes after system reset, [after an optionally defined `pre-init` code section][pre-init] and an always occurring internal RTIC
-initialization). The `init` task runs *with interrupts disabled* and has exclusive access to Cortex-M (the
+initialization.
-`bare_metal::CriticalSection` token is available as `cs`) while device specific peripherals are available through
+
-the `core` and `device` fields of `init::Context`.
+[pre-init]: https://docs.rs/cortex-m-rt/latest/cortex_m_rt/attr.pre_init.html
+
+The `init` and optional `pre-init` tasks runs *with interrupts disabled* and have exclusive access to Cortex-M (the
+`bare_metal::CriticalSection` token is available as `cs`).
+
+Device specific peripherals are available through the `core` and `device` fields of `init::Context`.
 
 ## Example
 
@@ -15,7 +20,7 @@ The example below shows the types of the `core`, `device` and `cs` fields, and s
 variable with `'static` lifetime.
 Such variables can be delegated from the `init` task to other tasks of the RTIC application.
 
-The `device` field is available when the `peripherals` argument is set to the default value `true`.
+The `device` field is only available when the `peripherals` argument is set to the default value `true`.
 In the rare case you want to implement an ultra-slim application you can explicitly set `peripherals` to `false`.
 
 ``` rust

book/en/src/by-example/app_priorities.md

@@ -18,8 +18,8 @@ The highest static priority task takes precedence when more than one
 task are ready to execute.
 
 The following scenario demonstrates task prioritization:
-Spawning a higher priority task A during execution of a lower priority task B pends
+Spawning a higher priority task A during execution of a lower priority task B suspends
-task A. Task A has higher priority thus preempting task B which gets suspended
+task B. Task A has higher priority thus preempting task B which gets suspended
 until task A completes execution. Thus, when task A completes task B resumes execution.
 
 ```text
@@ -53,7 +53,8 @@ when `baz`returns. When `bar` returns `foo` can resume.
 
 One more note about priorities: choosing a priority higher than what the device
 supports will result in a compilation error.
-The error is cryptic due to limitations in the language,
+
+The error is cryptic due to limitations in the Rust language
 if `priority = 9` for task `uart0_interrupt` in `example/common.rs` this looks like:
 
 ```text

book/en/src/by-example/app_task.md

@@ -4,15 +4,18 @@ Tasks, defined with `#[task]`, are the main mechanism of getting work done in RT
 
 Tasks can
 
-* Be spawned (now or in the future)
+* Be spawned (now or in the future, also by themselves)
-* Receive messages (message passing)
+* Receive messages (passing messages between tasks)
-* Prioritized allowing preemptive multitasking
+* Be prioritized, allowing preemptive multitasking
 * Optionally bind to a hardware interrupt
 
 RTIC makes a distinction between “software tasks” and “hardware tasks”.
-Hardware tasks are tasks that are bound to a specific interrupt vector in the MCU while software tasks are not.
 
-This means that if a hardware task is bound to an UART RX interrupt the task will run every
+*Hardware tasks* are tasks that are bound to a specific interrupt vector in the MCU while software tasks are not.
-time this interrupt triggers, usually when a character is received.
+
+This means that if a hardware task is bound to, lets say, a UART RX interrupt, the task will be run every
+time that interrupt triggers, usually when a character is received.
+
+*Software tasks* are explicitly spawned in a task, either immediately or using the Monotonic timer mechanism. 
 
 In the coming pages we will explore both tasks and the different options available.

book/en/src/by-example/hardware_tasks.md

@@ -1,24 +1,26 @@
 # Hardware tasks
 
-At its core RTIC is using the hardware interrupt controller ([ARM NVIC on cortex-m][NVIC])
+At its core RTIC is using a hardware interrupt controller ([ARM NVIC on cortex-m][NVIC])
-to perform scheduling and executing tasks, and all tasks except `#[init]` and `#[idle]`
+to schedule and start execution of tasks. All tasks except `pre-init`, `#[init]` and `#[idle]`
 run as interrupt handlers.
-This also means that you can manually bind tasks to interrupt handlers.
 
-To bind an interrupt use the `#[task]` attribute argument `binds = InterruptName`.
+Hardware tasks are explicitly bound to interrupt handlers.
-This task becomes the interrupt handler for this hardware interrupt vector.
 
-All tasks bound to an explicit interrupt are *hardware tasks* since they
+To bind a task to an interrupt, use the `#[task]` attribute argument `binds = InterruptName`.
+This task then becomes the interrupt handler for this hardware interrupt vector.
+
+All tasks bound to an explicit interrupt are called *hardware tasks* since they
 start execution in reaction to a hardware event.
 
 Specifying a non-existing interrupt name will cause a compilation error. The interrupt names
 are commonly defined by [PAC or HAL][pacorhal] crates.
 
-Any available interrupt vector should work, but different hardware might have
+Any available interrupt vector should work. Specific devices may bind
-added special properties to select interrupt priority levels, such as the
+specific interrupt priorities to specific interrupt vectors outside
+user code control. See for example the 
 [nRF “softdevice”](https://github.com/rtic-rs/cortex-m-rtic/issues/434).
 
-Beware of re-purposing interrupt vectors used internally by hardware features,
+Beware of using interrupt vectors that are used internally by hardware features;
 RTIC is unaware of such hardware specific details.
 
 [pacorhal]: https://docs.rust-embedded.org/book/start/registers.html

book/en/src/by-example/monotonic.md

@@ -1,7 +1,7 @@
 # Monotonic & spawn_{at/after}
 
 The understanding of time is an important concept in embedded systems, and to be able to run tasks
-based on time is useful. For this use-case the framework provides the static methods
+based on time is essential. The framework provides the static methods
 `task::spawn_after(/* duration */)` and `task::spawn_at(/* specific time instant */)`.
 `spawn_after` is more commonly used, but in cases where it's needed to have spawns happen
 without drift or to a fixed baseline `spawn_at` is available.
@@ -43,10 +43,14 @@ $ cargo run --target thumbv7m-none-eabi --example schedule
 {{#include ../../../../ci/expected/schedule.run}}
 ```
 
+A key requirement of a Monotonic is that it must deal gracefully with
+hardware timer overruns.
+
 ## Canceling or rescheduling a scheduled task
 
 Tasks spawned using `task::spawn_after` and `task::spawn_at` returns a `SpawnHandle`,
 which allows canceling or rescheduling of the task scheduled to run in the future.
+
 If `cancel` or `reschedule_at`/`reschedule_after` returns an `Err` it means that the operation was
 too late and that the task is already sent for execution. The following example shows this in action:
 

book/en/src/by-example/resources.md

@@ -30,13 +30,13 @@ task.
 Thus, a task `#[local]` resource can only be accessed by one singular task.
 Attempting to assign the same `#[local]` resource to more than one task is a compile-time error.
 
-Types of `#[local]` resources must implement [`Send`] trait as they are being sent from `init`
+Types of `#[local]` resources must implement a [`Send`] trait as they are being sent from `init`
-to target task and thus crossing the thread boundary.
+to a target task, crossing a thread boundary.
 
 [`Send`]: https://doc.rust-lang.org/stable/core/marker/trait.Send.html
 
 The example application shown below contains two tasks where each task has access to its own
-`#[local]` resource, plus that the `idle` task has its own `#[local]` as well.
+`#[local]` resource; the `idle` task has its own `#[local]` as well.
 
 ``` rust
 {{#include ../../../../examples/locals.rs}}
@@ -49,12 +49,14 @@ $ cargo run --target thumbv7m-none-eabi --example locals
 {{#include ../../../../ci/expected/locals.run}}
 ```
 
+Local resources in `#[init]` and `#[idle]` have `'static`
+lifetimes. This is safe since both tasks are not re-entrant.
+
 ### Task local initialized resources
 
-A special use-case of local resources are the ones specified directly in the resource claim,
+Local resources can also be specified directly in the resource claim like so:
-`#[task(local = [my_var: TYPE = INITIAL_VALUE, ...])]`, this allows for creating locals which do no need to be
+`#[task(local = [my_var: TYPE = INITIAL_VALUE, ...])]`; this allows for creating locals which do no need to be
 initialized in `#[init]`.
-Moreover, local resources in `#[init]` and `#[idle]` have `'static` lifetimes, this is safe since both are not re-entrant.
 
 Types of `#[task(local = [..])]` resources have to be neither [`Send`] nor [`Sync`] as they
 are not crossing any thread boundary.
@@ -92,9 +94,9 @@ preempting the critical section. This synchronization protocol is known as the
 [srp]: https://en.wikipedia.org/wiki/Stack_Resource_Policy
 
 In the example below we have three interrupt handlers with priorities ranging from one to three.
-The two handlers with the lower priorities contend for the `shared` resource and need to lock the
+The two handlers with the lower priorities contend for a `shared` resource and need to succeed in locking the
-resource for accessing the data. The highest priority handler, which do not access the `shared`
+resource in order to access its data. The highest priority handler, which does not access the `shared`
-resource, is free to preempt the critical section created by the lowest priority handler.
+resource, is free to preempt a critical section created by the lowest priority handler.
 
 ``` rust
 {{#include ../../../../examples/lock.rs}}

book/en/src/by-example/software_tasks.md

@@ -2,29 +2,33 @@
 
 The RTIC concept of a software task shares a lot with that of [hardware tasks](./hardware_tasks.md)
 with the core difference that a software task is not explicitly bound to a specific
-interrupt vector, but rather a “dispatcher” interrupt vector running
+interrupt vector, but rather bound to a “dispatcher” interrupt vector running
-at the same priority as the software task.
+at the intended priority of the software task (see below).
 
-Thus, software tasks are tasks which are not directly assigned to a specific interrupt vector.
+Thus, software tasks are tasks which are not *directly* bound to an interrupt vector.
 
-The `#[task]` attribute used on a function declare it as a software tasks.
+The `#[task]` attributes used on a function determine if it is
-Observe the absence of a `binds = InterruptName` argument to the attribute.
+software tasks, specifically the absence of a `binds = InterruptName`
-The static method `task_name::spawn()` spawns (starts) a software task and
+argument to the attribute definition.
-given that there are no higher priority tasks running the task will start executing directly.
 
-All software tasks at the same priority level shares an interrupt handler acting as a dispatcher.
+The static method `task_name::spawn()` spawns (schedules) a software
-What differentiates software and hardware tasks are the dispatcher versus bound interrupt vector.
+task by registering it with a specific dispatcher.  If there are no
+higher priority tasks available to the scheduler (which serves a set
+of dispatchers), the task will start executing directly.
 
-The interrupt vectors used as dispatchers can not be used by hardware tasks.
+All software tasks at the same priority level share an interrupt handler bound to their dispatcher.
+What differentiates software and hardware tasks is the usage of either a dispatcher or a bound interrupt vector.
 
-A list of “free” (not in use by hardware tasks) and usable interrupts allows the framework
+The interrupt vectors used as dispatchers cannot be used by hardware tasks.
-to dispatch software tasks.
 
-This list of dispatchers, `dispatchers = [FreeInterrupt1, FreeInterrupt2, ...]` is an
+Availability of a set of “free” (not in use by hardware tasks) and usable interrupt vectors allows the framework
+to dispatch software tasks via dedicated interrupt handlers.
+
+This set of dispatchers, `dispatchers = [FreeInterrupt1, FreeInterrupt2, ...]` is an
 argument to the `#[app]` attribute.
 
-Each interrupt vector acting as dispatcher gets assigned to one priority level meaning that
+Each interrupt vector acting as dispatcher gets assigned to a unique priority level meaning that
-the list of dispatchers need to cover all priority levels used by software tasks.
+the list of dispatchers needs to cover all priority levels used by software tasks.
 
 Example: The `dispatchers =` argument needs to have at least 3 entries for an application using
 three different priorities for software tasks.

book/en/src/by-example/starting_a_project.md

@@ -8,7 +8,7 @@ If you are targeting ARMv6-M or ARMv8-M-base architecture, check out the section
 [`defmt-app-template`]: https://github.com/rtic-rs/defmt-app-template
 
 This will give you an RTIC application with support for RTT logging with [`defmt`] and stack overflow
-protection using [`flip-link`]. There are also a multitude of examples available provided by the community:
+protection using [`flip-link`]. There is also a multitude of examples provided by the community:
 
 - [`rtic-examples`] - Multiple projects
 - [https://github.com/kalkyl/f411-rtic](https://github.com/kalkyl/f411-rtic)

book/en/src/by-example/tips_indirection.md

@@ -9,12 +9,16 @@ Indirection can minimize message passing overhead:
 instead of sending the buffer by value, one can send an owning pointer into the
 buffer.
 
-One can use a global allocator to achieve indirection (`alloc::Box`,
+One can use a global memory allocator to achieve indirection (`alloc::Box`,
 `alloc::Rc`, etc.), which requires using the nightly channel as of Rust v1.37.0,
 or one can use a statically allocated memory pool like [`heapless::Pool`].
 
 [`heapless::Pool`]: https://docs.rs/heapless/0.5.0/heapless/pool/index.html
 
+As this example of approach goes completely outside of RTIC resource
+model with shared and local the program would rely on the correctness
+of the memory allocator, in this case `heapless::pool`.
+
 Here's an example where `heapless::Pool` is used to "box" buffers of 128 bytes.
 
 ``` rust

book/en/src/by-example/tips_monotonic_impl.md

@@ -11,7 +11,7 @@ Moreover, the relation between time and timers used for scheduling was difficult
 
 For RTIC 1.0 we instead assume the user has a time library, e.g. [`fugit`] or [`embedded_time`],
 as the basis for all time-based operations when implementing `Monotonic`.
-This makes it much easier to correctly implement the `Monotonic` trait allowing the use of
+These libraries make it much easier to correctly implement the `Monotonic` trait, allowing the use of
 almost any timer in the system for scheduling.
 
 The trait documents the requirements for each method,

book/en/src/by-example/tips_static_lifetimes.md

@@ -1,6 +1,6 @@
 # 'static super-powers
 
-In `#[init]` and `#[idle]` `local` resources has `'static` lifetime.
+In `#[init]` and `#[idle]` `local` resources have `'static` lifetime.
 
 Useful when pre-allocating and/or splitting resources between tasks, drivers
 or some other object.

book/en/src/migration/migration_v5.md

@@ -368,3 +368,5 @@ Both software and hardware tasks can now be defined external to the `mod app`.
 Previously this was possible only by implementing a trampoline calling out the task implementation.
 
 See examples `examples/extern_binds.rs` and `examples/extern_spawn.rs`.
+
+This enables breaking apps into multiple files.